Unleash the Hare! Sale - Sitewide Use code "HARE10" for 10% off your order at checkout!

Oops!

404 - PAGE NOT FOUND

The page you are looking for might have moved or is temporarily unavailable.

Go To Homepage

(!Topic Name="0-home-featured-products-2" !)

We are dedicated to providing our customers with the highest quality products and services in a timely and efficient manner.

Are you looking for:

Hanwei Practical Bastard Sword by Paul Chen
Our Hanwei Practical Bastard Sword is made by Paul Chen. The Practical Bastard Sword has a blunt 5160 high carbon steel blade and is designed for use in western martial arts and medieval re-enactments. Includes a natural colored leather grip and leather scabbard. By customer request we have produced a re-enactment version of our Bastard sword. The blade is forged in 5160 high-carbon steel, to minimize burring, and the transverse thickness of the guard has been increased, both to provide adequate strength for re-enactment use and to present a safer profile at the ends of the guard.

Another innovation is the provision of an all-leather scabbard, in contrast with the rigid scabbards normally provided with our Practical swords - this is designed both to provide an extra margin of safety when combatants fall on the scabbard in battle and also to minimize the need for replacement scabbards. The sword is supplied with the grip and scabbard in a neutral-colored leather to allow customization to the owners taste.

KEY FEATURES:

* 5160 Steel
* Dyeable Leather Handle/Scabbard
* Built for reenactors

MEASUREMENTS: Overall: 49 1/2"
Blade Length: 38"
Handle Length: 11"
Weight: 3lb 10oz
Blade Steel: 5160

We can also provide Engraving Services. Click Here to see more details.

This item can be personalized as follows:
Initials: 1 line, up to 3 characters from grip to tip
Sword: 2 lines up to 25 characters above ricasso from grip to tip

Please note:
 We cannot accept returns on sharpened or personalized items (i.e. engraved) that are not defective.  They may not be returned because of the customization that has been done to the product.  Be sure when you order; all sales are final!
Hanwei Practical Norman Sword by Paul Chen
An important addition to our European practical line is the Hanwei Practical Norman Sword by Paul Chen. It is based on a classic 11th century pattern popular during the Norman Invasion of Britain. The high-carbon deeply-fullered blade is light and well-balanced, with the wide edges required by the re-enactment community. The guard is wider than that of the earlier Viking designs that preceded this pattern and the pommel is of the “tea-cosy” type The grip is grooved and leather-wrapped and the scabbard is left plain for owner decoration.

Key Features:
Made for the re-enactor
Authentic look and feel
Complies with safety requirements

Specifications:
Overall length: 36"
Blade length: 30"
Weight: 2lb 5oz

We can also provide Engraving Services. Click Here to see more details.

This item can be personalized as follows:
Initials: 1 line, up to 3 characters from grip to tip
Sword: 2 lines up to 25 characters above ricasso from grip to tip

Please note:
 We cannot accept returns on sharpened or personalized items (i.e. engraved) that are not defective.  They may not be returned because of the customization that has been done to the product.  Be sure when you order; all sales are final!
Hanwei Practical Single Hand Sword by Paul Chen
This Hanwei Practical Single Hand Sword by Paul Chen is a very popular and affordable weapons feature authentic hilt styling, with fully tempered un-edged and un-pointed blades. They are designed to withstand rugged use while providing the level of safety required by many of today’s re-enactment societies. The blades are crafted from 1065 high-carbon steel, hardened to 50HRC, which restricts edge-notching to acceptable levels while providing resilience and protection against brittleness. While the blades are substantial, they are fullered to provide balance and good handling characteristics. They feature 1/16” wide edges and rounded tips for safety. The tangs are also substantial, with radiused corners at the blade shoulders and no welds. The end of the tang is riveted over the pommel, which both eliminates any possibility of inadvertent dis-assembly. The hardwood grips are leather-covered.

The scabbards are fabricated in glass-filled resin, to eliminate swelling and to minimize blade corrosion problems, with belt rings that adjust to allow vertical or horizontal carry. The wood-grain finish is attractive, but most re-enactors will decorate the scabbard to match their persona. The Practical Single-Hand Sword is based on the Marshall sword, so named for one of England’s finest knights of the latter half of the 12th century. The sword is classically styled, with a cruciform hilt, wheel pommel and a ridged-and-fullered blade that is both stiff and surprisingly light. With a weight of less than 2 ½ lbs., the sword can be wielded forcefully without undue wear and tear on the arm. Made by Hanwei.

KEY FEATURES:

* Made for the re-enactor
* Authentic look and feel
* Complies with safety requirements

MEASUREMENTS: 
Overall: 36 1/2";
Blade Length: 30"
Handle Length: 6 1/2"
Weight: 2lb 7oz
Point of Balance: 5"
Thickness at Guard: .230
Blade Steel: 1065

We can also provide Engraving Services. Click Here to see more details.

This item can be personalized as follows:
Initials: 1 line, up to 3 characters from grip to tip
Sword: 2 lines up to 25 characters above ricasso from grip to tip

Please note:
 We cannot accept returns on sharpened or personalized items (i.e. engraved) that are not defective.  They may not be returned because of the customization that has been done to the product.  Be sure when you order; all sales are final!
Hanwei Practical Mortuary Hilt Sword by Paul Chen
The Hanwei Practical Mortuary Hilt Sword by Paul Chen allows the opportunity to own and use a Hanwei (Chen) blade at the cost of an economy sword. This sword is designed to replicate the new (Chen) Mortuary Hilt Sword (SH2004) above. The blade is forged and differentially tempered, using the same process as the more expensive blades and has a 6" fuller. Black leather wrapped grip is 4 1/2" long. Cost savings are effected by using fittings which, while making no claims to authenticity, are very strongly built to withstand the rigors of cutting exercises. The black steel-mounted polymer scabbard was designed with the re-enactor in mind to help protect the sword from rain! Blade Thickness 1/4" tapering to 1/8" at tip.

KEY FEATURES:
* Authentic replica of museum piece
* Fully functional
* Scabbard included

MEASUREMENTS:
BLADE LENGTH: 30 1/2"
HANDLE LENGTH: 6"
OVERALL LENGTH: 36 1/2"
WEIGHT: 2lb 2oz

We can also provide Engraving Services. Click Here to see more details.

This item can be personalized as follows:
Initials: 1 line, up to 3 characters from grip to tip
Sword: 2 lines up to 25 characters above ricasso from grip to tip

Please note:
 We cannot accept returns on sharpened or personalized items (i.e. engraved) that are not defective.  They may not be returned because of the customization that has been done to the product.  Be sure when you order; all sales are final!

Hanwei Practical Basket Hilt Broadsword by Paul Chen
The Hanwei Practical Basket Hilt Broadsword by Paul Chen is built for the re-enactor. The basket is identical to the edged version (SH2002), but the blade is unsharpened, with 1/16 inch safety edges and rounded tips, complying with the combat rules of many re-enactment societies. The Practical Basket Hilt Broadsword Blade is crafted in 1065 high carbon steel, hardened to 50HRC, which reduces edge-notching to acceptable levels while providing resilience and protection against brittleness. The Practical Basket Hilt Scabbard is finished in matte black, ready for owner customization if desired. Our Practical Basket Hilt Broadsword is a Functional and Battle Ready Blunted Basket Hilt Sword.

KEY FEATURES:
* Made for the re-enactor
* Authentic look and feel
* Complies with safety requirements

MEASUREMENTS:
Overall: 38 1/8"
Blade Length: 31 3/4"
Handle Length: 6 1/2"
Weight: 2lb
Point of Balance: 5"
Point of Harmonics: 20"
Width at Guard: 1.67"
Width at Tip: .73"
Thickness at Guard: .23"
Thickness at Tip: .15"

Specs will vary slightly from piece to piece.

We can also provide Engraving Services. Click Here to see more details.

This item can be personalized as follows:
Initials: 1 line, up to 3 characters from grip to tip
Sword: 2 lines up to 25 characters above ricasso from grip to tip

Please note:
 We cannot accept returns on sharpened or personalized items (i.e. engraved) that are not defective.  They may not be returned because of the customization that has been done to the product.  Be sure when you order; all sales are final!

Loading...
x
Chat service by BoldChat